TL;DR
Get home appliances delivered free — and shop member deals
- Fast, free delivery on millions of items
- Access to Prime Big Deal Days deals on October 6–7
- Prime Video, Amazon Music and more included
Home Assistant 2026.10 is in beta with new controls for supported Matter leak sensors and locks, plus frequency and power-factor readings for devices that expose them. The update also revises the Map dashboard and simplifies conditions for automations with multiple triggers; the stable release is expected Oct. 7, 2026.
Home Assistant 2026.10 has entered beta testing with new controls for supported Matter leak sensors and smart locks, giving users access to device settings that the integration did not previously expose. The release also adds some electrical measurements and changes how users manage maps and multi-trigger automations; features could still change before the stable release, expected Oct. 7, 2026.
Supported Matter leak sensors gain separate settings to enable or disable their audible and visual alarms. The controls operate independently, so changing one does not alter the other. They set the sensor’s alarm behavior; they are not controls for manually sounding an alarm. The report identifies the IKEA KLIPPBOK as a supported example and says the settings worked in testing with that sensor and the Shelly Flood.
Compatible Matter locks gain a one-touch locking setting that lets users choose whether a single keypad touch can lock the door, a feature relevant to retrofit smart deadbolts. Devices that expose the relevant measurements can also report frequency and power factor. These features depend on the capabilities of the individual device; the source does not say every Matter sensor, lock or electrical device will have them.
The update also adds settings for upward and downward travel time and slat rotation time on WAGO Home Blind Control models 2757-1105 (Wi-Fi) and 2757-1106 (Thread). The devices can update those reference timings after a full movement between end positions, with the revised values reflected in Home Assistant. Other changes include a redesigned Map dashboard, an updated zone editor and a more direct interface for selecting triggers in home automation conditions.
More Matter Settings in Home Assistant
The new controls address a practical limitation for people managing compatible devices through Home Assistant: some settings were available on the hardware or through another interface but not exposed in its Matter integration. Bringing alarm preferences and lock behavior into the same platform can make device configuration easier to manage alongside other smart-home controls.
The impact is conditional, not universal. Users need devices that support the relevant Matter features, and the release notes do not establish that all manufacturers or models will expose identical options. Frequency and power-factor reporting may give users additional electrical information, but the source does not describe which devices support those readings or how Home Assistant will use them. The automation editor changes, meanwhile, could reduce setup friction for routines with different triggers and action branches.
Matter leak sensor with audible alarm
As an affiliate, we earn on qualifying purchases.
As an affiliate, we earn on qualifying purchases.
Matter Integration and Interface Changes
The release extends Home Assistant’s existing Matter integration by surfacing settings and measurements reported by supported devices. For leak sensors, the available alarm switches depend on the alarm modes a device supports. The report describes the settings as changes to device configuration, rather than as a way to trigger an alert remotely.
The Map dashboard update follows the Map tiles integration introduced in version 2026.9. The revised view places People, Devices and Zones beside the map on desktop and in a pull-up sheet on phones. Selecting a person shows recent activity; selecting a zone shows who is there. Home Assistant retrieves OpenStreetMap Foundation tiles and caches recently used tiles, but the report says this is not a complete offline map.
For automations, users previously had to expose a trigger’s ID, assign one, and then select that identifier in a “Triggered by” condition. The new editor allows direct trigger selection and manages IDs for users. It also warns about missing trigger references and can fix shared IDs by updating affected conditions. People who use trigger.id directly in templates or action data still need to maintain those references themselves.
Compatibility and Beta Changes
The 2026.10 release is still a beta, so its features may change or be removed before the stable version. The source does not provide a complete device compatibility list for leak-sensor alarms, one-touch lock controls, or electrical measurements. Availability will depend on whether a particular Matter device exposes the required settings or values.
The report’s testing of the alarm controls with the IKEA KLIPPBOK and Shelly Flood is attributed to the reporter’s own testing; it is not a claim that every model from either maker supports the controls. It is also not clear from the available information whether additional devices will gain support before the final release. The map’s tile cache may help during brief internet interruptions, but it should not be treated as an offline map service.
Stable Release Expected Oct. 7
Home Assistant’s stable 2026.10 release is expected Wednesday, Oct. 7, according to the source report. That date is a planned release point, not confirmation that the final version has already shipped. Beta testers can install the test build through Settings > System > Updates by opening the three-dot menu and selecting “Join beta.”
Until release, testers and users should check the final notes for any changes to device compatibility or interface behavior. Those installing the beta can report issues in Home Assistant’s official community forum. The final rollout will clarify which of the announced features remain in the stable release and which supported devices expose them.
Key Questions
What is new for Matter leak sensors in Home Assistant 2026.10?
Supported sensors gain separate settings for audible and visual alarms. The options control the sensor’s alarm behavior and operate independently; they are not buttons to sound an alarm. Availability depends on the device’s supported modes.
Which leak sensors are confirmed to work with the new controls?
The source identifies the IKEA KLIPPBOK as an example and says the reporter tested the controls with IKEA KLIPPBOK and Shelly Flood. It does not provide a full compatibility list or confirm that every model from either brand supports the settings.
What does the new smart-lock setting do?
Compatible Matter locks can expose a one-touch locking switch, allowing users to decide whether a single keypad touch locks the door. The feature is limited to locks that provide the relevant setting.
When will Home Assistant 2026.10 be released?
The stable release is expected Oct. 7, 2026. The version is currently in beta, and features may change before the stable rollout.
Source: rss
Fall yard work Picks
leaf blowers
As an affiliate, we earn on qualifying purchases.
